Compression Platens

CPC-20T/50T Circular Compression Platens

CPC-20T compression platens are 20kN capacity Aluminum platens and the CPC-50Ts are 50kN capacity Steel platens.

Platen diameter options include:

• 56mm (2.2”)
• 96mm (3.78”)
• 116mm (4.57”)
• 156mm (6.14”)
• 196mm (7.72”)
• 246mm (9.68”)
• 296mm (11.65”)

Other force capacities, platen dimensions, high/low temperature ranges, and mounting adapters are also available.

Download Datasheet

Picture shows ASTM D1621 compression test setup for plastics compression testing.

CPS-20T/50T Square & Rectangular Compression Platens

CPS-20T compression platens are 20kN capacity Aluminum platens and the CPS-50Ts are 50kN capacity Steel platens.

Square and rectangular platen options include:

• 50 by 50mm (1.97 by 1.97”)
• 100 by 100mm (3.94 by 3.94”)
• 120 by 120mm (4.72 by 4.72”)
• 120 by 180mm (4.72 by 7.1”)
• 125 by 250mm (4.92 by 9.84”)
• 150 by 150mm (5.9 by 5.9”)
• 150 by 300mm (5.9 by 11.8”)
• 200 by 200mm (7.87 by 7.87″)
• 250 by 250mm (9.84 by 9.84″)
• 300 by 300mm (11.8 by 11.8″)
• 350 by 350mm (13.8 by 13.8″)
• 400 by 400mm (15.7 by 15.7″)
• 400 by 600mm (15.7 by 23.6″)
• 500 by 500mm (19.7 by 19.7″)

Other force capacities, platen dimensions, high/low temperature ranges, and mounting adapters are available.

Download Datasheet

Picture shows ASTM D2412 plastic pipe compression test setup.

CPS-L Perforated Compression Platens

CPS-L perforated compression platens come with evenly spaced out 6mm diameter holes. The perforated design allows air to outflow and is preferred for certain foam testing applications.

Configurations include:

• 120 by 120mm (4.7 by 4.7″)
• 150 by 150mm (5.9 by 5.9″)
• 150 by 220mm (5.9 by 8.7″)
• 400 by 400mm (15.7 by 15.7″)

Different force capacities, other platen dimensions, high and low temperature ranges, and mounting adapters are also available.

Download Datasheet

Picture shows ADMET 5603F Foam Testing System with perforated base.

CP-SST Self-Aligning Compression Platens

CP-SST spherically seated platens are self-aligning and fixable. They are used with specimens that do not have a parallel surface when placed in between the platens. Once mounted, operators can apply a small pre-load and fix the platen at the required position to start the test.

CP-SSTi platens are Aluminum platens applicable for low-weight compression samples such as packaging materials. CP-SSTk platens are Hardened Steel platens for metal, concrete, and other specimens requiring a higher force capacity.

Standard diameter options include:

• 56mm (2.2”)
• 96mm (3.78”)
• 116mm (4.57”)
• 156mm (6.14”)
• 196mm (7.72”)
• 246mm (9.68”)

Extended force capacities, platen dimensions, high/low temperature ranges, and mounting adapters are also available.

Download Datasheet

MPP Multi-Purpose (T-Slot) Platens

Multi-purpose T-slot platens can be ordered in Aluminum or Steel for a variety of testing applications. They are often used to attach test fixtures and grips to testing machines. Available dimensions include:

• 250 by 250mm (9.8 by 9.8″)
• 220 by 400mm (8.7 by 15.7″)
• 380 by 400mm (15 by 15.7″)

Download MPP Datasheet

CC Compressometer Cages

CC compression cages include compression platens between guide bars and customizable mounting adapters. Packaging materials, boxes, large closed cell foams may be tested with compression cages.

Platen dimension options are:

• 100 by 100mm (3.94 by 3.94”)
• 150 by 150mm (5.9 by 5.9″)
• 200 by 200mm (7.87 by 7.87″)
• 250 by 250mm (10.2 by 10.2″)
• 300 by 300mm (11.8 by 11.8″)
• 400 by 400mm (15.7 by 15.7″)

Vertical test areas range from 200mm (7.9″)  to 500mm (19.7″).

Download Datasheet

ASTM C39 Concrete Cylinder Compression Platens

ASTM C39 concrete compression test setup includes two steel platens with hardened surfaces. ADMET offers:

• CP-SST spherically seated upper platen
• CPC round lower compression platen
• Concrete Testing Indicators to retrofit manual machines

Contact us for further information.

ASTM C469 Cylindrical Concrete Compressometer Assembly

Used for evaluating the Young’s modulus and Poisson’s ratio of concrete cylinders per ASTM C469, the compressometer assembly includes a yoke with displacement transducer mounts. Displacement transducers may be ordered with the compressometer.

Options available for 6 x 12 in (152.4 x 304.8mm), 4 x 8 in (101.6 x 203.2mm), or 3 x 6 in (76.2 x 152.4mm) cylinders.

ADMET also offers Concrete Testing Indicators to retrofit manual machines.

Contact us for further information.

ASTM D695 Rigid Plastics Compression Subpress Assembly

ASTM D695 compression assembly includes upper and lower rectangular compression fixtures and a displacement transducer mounted to the subpress to measure the compressive load properties of unreinforced and reinforced rigid plastics. Travel range options for the deflection probe include 1/4”, 1/2”, and 1”.

This fixture can be used on ADMET and other makes of testing machines.

Contact us for further information.

ASTM D3574-B1 Indentation Force Deflection (IFD) Foam Testing Accessories

ADMET’s ASTM D3574 B1 Indentation Force Deflection (IFD)  accessory package includes:

• CPC-203D: 203mm diameter flat compression platen without centering rings
• Universal Joint Adapter (swivel mount)
• CP Perforated Base: 6.5mm diameter holes, spaced out by 20mm

CPC-203D platen may be ordered separately. ADMET grips and fixtures can be used with other testing machines such as Instron, MTS, Tinius Olsen, and more.

Contact us for further information.

ADMET Custom Compression Fixtures

ADMET has the expertise to design, build, deliver, and implement custom mechanical test equipment including compression fixtures according to customer-specific testing requirements. We have custom-built compression fixtures for specific materials and testing applications.

Picture shows ISO 13314 compression platen with displacement transducer mounts. Contact an ADMET Sales Engineer to further discuss your needs.