Some testing standards require specific grips and fixtures to securely hold the specimens. Below, you’ll find a sample of fixtures we’ve provided to meet this standards. If you do not see your testing standard, contact us and we will work with you to find the right fixture.
ASTM C297
Fixture for flatwise tensile strength test for sandwich panels according to ASTM C297
- Insert options: 25.4 x 25.4mm, 50.8 x 50.8mm, 76.2 x 76.2mm
- Click to download datasheet
ASTM C469
Compressometer-extensometer assembly with two transducers to test axial and transverse strains according to test method ASTM C469
ASTM C1161
3-point and 4-point bend fixture with cylindrical rollers according to ASTM C1161
- Click for Bend Testing Equipment Guide
ASTM C1452
Shear test fixture for welded fabric samples according to ASTM C1452
- Capacity: 200kN
- 3-16mm diameter
ASTM C1609
Net deflection fixture and 3rd point beam fixture designed according to ASTM C1609
- Includes two transducers that are mounted mid-span of each side of the beam
- Includes ASTM C1812 compliant supports
- Click to download datasheet
- Click for Bend Testing Equipment Guide
ASTM D395
Compression fixture designed according to test method ASTM D395
ASTM D695
Fixture designed according to ASTM D695 Section 5.3
- Includes compression subpress and the integrated displacement transducer
ASTM D790
3-point bend fixture with rollers or hardened supports according to ASTM D790
ASTM D1414
O-Ring Tensile Grips for ASTM D1414
- Click to download datasheet
- Motorized and non-motorized options available
ASTM D1623
Use for ASTM D1623 Type B: Tension and tensile adhesion properties for rigid cellular plastics
ASTM D1781
- For climbing drum peel tests per ASTM D1781
- Tensile Force: 5kN
- Drum width: 100mm
- Drum diameter: 100mm
- Download FS-CDT Datasheet
- FS-CDT Climbing Drum Peel Fixture Setup
ASTM D2290
Test fixture designed according to ASTM D2290 to test the apparent hoop tensile strength of plastic pipe by split disk method
- Split disks available for Procedure A, B, and C
ASTM D3167
Floating roller peel fixture that meets requirements for ASTM D3167 and ISO 53289
- Drum width: 30mm (1.15 in)
- Drum diameter: 25mm (1.0 in)
- Drums placed at 45 degree angle
ASTM D3354
Double-axis fixture used for blocking load of plastic film by the parallel plate method according to ASTM D3354
ASTM D3787
Puncture fixture designed according to test method ASTM D3787
- Click to download datasheet
- Read the Puncture Testing Essentials covering other options
ASTM D4833
Puncture fixture designed according to test method ASTM D4833
- Click to download datasheet
- Read the Puncture Testing Essentials covering other options
ASTM D4964
Hook grips to test elastic fabrics per ASTM D4964
Grips can be modified to test vessels and more
ASTM D5379
Shear fixture designed according to test method ASTM D5379
- Click for Shear Testing Essentials
ASTM D5748
Puncture fixture designed according to test method ASTM D5748
- Click to download datasheet
- Read the Puncture Testing Essentials covering other options
ASTM E290
Guided three-point bend fixture designed according to ASTM E290
ASTM F1306
Puncture fixture designed according to test method ASTM F1306
- Click to download datasheet
- Read the Puncture Testing Essentials covering other options
ASTM F2118
Fatigue grips designed per ASTM F2118
- Offered with serrated jaws for flat samples or v-jaws for round samples
- Click to download datasheet
DIN 68200
Foam compression fixture designed according to DIN 68200
EN 14651
Flex fixturing designed to determine the flexural tensile strength and the limit of proportionality of metallic fibered concrete according to EN 14651 European Standard.
ISO 7206
ISO 7206 fixture with a potting cylinder
- Includes an embedding fixture
ISO 13314
Compression platens designed according to ISO 13314
- Includes mounting holes for displacement transducers
